DFRobot Arduino Smart Home kit智能家居语音识别 DF创客社区

admin 发表于 2012-6-29 10:33:40

DFRobot Arduino Smart Home kit智能家居语音识别

晚上回到家，家里黑漆漆一片，得找到开灯的按钮才算完事，有时候在想，如果灯泡会听话该多好啊，有了这个想法，智能家居就应运而生了，用Arduino打造这么一款智能家居套件并为它取了一个很搞的名字“小米渣”，需要开灯的时候，你只需叫小米渣开灯，小米渣就会立马为你打开电灯并回答：“正在开灯”，小米渣的功能可不止这一个功能哦。
功能介绍：
识别开关灯命令，执行开关灯操作，并语音播报当前状态。
识别温湿度读取命令，并语音播报当前温湿度情况。
实时监测危险气体，一旦检测到立即报警并语音播报危险情况。
未有识别时不做操作，识别命令有误时播报“请问您在说什么？”。
你也可以考考小米渣：“需要开灯吗？”，系统就会对环境光线进行检测，光线暗的情况下，小米渣会提醒你：“光线不足，正在开灯”然后开灯，如果光线明亮时，小米渣会说：“光线明亮，不需要开灯”保持灯在关的状态（判断光线强弱的阈值在程序中进行设置，用户可以自行修改）。

lmaq 发表于 2012-8-19 15:22:44

语音合成模块做的？淘宝上看到了
有程序的例子吗？想学学:)

zhqh 发表于 2012-11-10 11:40:22

想学习一下，曾经有个想法是搞个家居的智能化系统。

mickey 发表于 2012-11-13 13:09:57

套件有例程。智能家居自己做，很不错的套件哦，还可以自己增加传感器。

mickey 发表于 2012-11-13 13:16:30

淘宝地址;https://item.taobao.com/item.htm? ... ysk&id=14138585871&

8879576 发表于 2013-3-22 14:20:57

USB驱动安装不了？

mickey 发表于 2013-4-5 00:17:32

下载新版的arduino IDE！可以安装驱动。

ruth 发表于 2013-6-21 11:31:08

我把程式COPY后，点验证，出现如下提示:(，请高人帮忙看看怎么解决？谢谢啦！:P
‘syn6288’does not name a type
sketch_jun21c.ino:8:21: error: Syn6288.h: No such file or directory
sketch_jun21c:10: error: 'Syn6288' does not name a type
sketch_jun21c:14: error: 'uint8' does not name a type
sketch_jun21c.ino: In function 'void finally(unsigned char)':
sketch_jun21c:103: error: 'syn' was not declared in this scope
sketch_jun21c.ino: In function 'void ExtInt0Handler()':
sketch_jun21c:190: error: 'Voice' was not declared in this scope
sketch_jun21c.ino: In function 'void setup()':
sketch_jun21c:197: error: 'Voice' was not declared in this scope
sketch_jun21c:197: error: 'MIC' was not declared in this scope
sketch_jun21c:197: error: 'VoiceRecognitionV1' was not declared in this scope
sketch_jun21c.ino: In function 'void loop()':
sketch_jun21c:208: error: 'uint8' was not declared in this scope
sketch_jun21c:208: error: expected `;' before 'nAsrRes'
sketch_jun21c:209: error: 'nAsrStatus' was not declared in this scope
sketch_jun21c:209: error: 'LD_ASR_NONE' was not declared in this scope
sketch_jun21c:217: error: 'syn' was not declared in this scope
sketch_jun21c:223: error: 'LD_ASR_RUNING' was not declared in this scope
sketch_jun21c:224: error: 'LD_ASR_ERROR' was not declared in this scope
sketch_jun21c:226: error: 'LD_ASR_NONE' cannot appear in a constant-expression
sketch_jun21c:229: error: 'Voice' was not declared in this scope
sketch_jun21c:239: error: 'LD_ASR_FOUNDOK' was not declared in this scope
sketch_jun21c:242: error: 'nAsrRes' was not declared in this scope
sketch_jun21c:242: error: 'Voice' was not declared in this scope
sketch_jun21c:248: error: 'LD_ASR_FOUNDZERO' was not declared in this scope

ruth 发表于 2013-6-21 11:39:48

我把程式COPY后，点验证，出现如下提示:(，请高人指点。。。谢谢啦！:P
‘syn6288’does not name a type
sketch_jun21c.ino:8:21: error: Syn6288.h: No such file or directory
sketch_jun21c:10: error: 'Syn6288' does not name a type
sketch_jun21c:14: error: 'uint8' does not name a type
sketch_jun21c.ino: In function 'void finally(unsigned char)':
sketch_jun21c:103: error: 'syn' was not declared in this scope
sketch_jun21c.ino: In function 'void ExtInt0Handler()':
sketch_jun21c:190: error: 'Voice' was not declared in this scope
sketch_jun21c.ino: In function 'void setup()':
sketch_jun21c:197: error: 'Voice' was not declared in this scope
sketch_jun21c:197: error: 'MIC' was not declared in this scope
sketch_jun21c:197: error: 'VoiceRecognitionV1' was not declared in this scope
sketch_jun21c.ino: In function 'void loop()':
sketch_jun21c:208: error: 'uint8' was not declared in this scope
sketch_jun21c:208: error: expected `;' before 'nAsrRes'
sketch_jun21c:209: error: 'nAsrStatus' was not declared in this scope
sketch_jun21c:209: error: 'LD_ASR_NONE' was not declared in this scope
sketch_jun21c:217: error: 'syn' was not declared in this scope
sketch_jun21c:223: error: 'LD_ASR_RUNING' was not declared in this scope
sketch_jun21c:224: error: 'LD_ASR_ERROR' was not declared in this scope
sketch_jun21c:226: error: 'LD_ASR_NONE' cannot appear in a constant-expression
sketch_jun21c:229: error: 'Voice' was not declared in this scope
sketch_jun21c:239: error: 'LD_ASR_FOUNDOK' was not declared in this scope
sketch_jun21c:242: error: 'nAsrRes' was not declared in this scope
sketch_jun21c:242: error: 'Voice' was not declared in this scope
sketch_jun21c:248: error: 'LD_ASR_FOUNDZERO' was not declared in this scope

Ricky 发表于 2013-6-21 12:02:38

库没有找到，看看类库是不是在Arduino Library 目录下面

ruth 发表于 2013-6-21 14:41:30

Ricky,谢谢：）这个问题解决了，可是验证还是失败，请再帮忙指点，偶是初学者，菜鸟级，请各位多关照啦~~invalid conversion form 'int8_t*' to'uint8_t*'In file included from sketch_jun21a.ino:7:
C:\Documents and Settings\My Documents\Arduino\libraries\Voice/Voice.h:83: error: 'byte' does not name a type
C:\Documents and Settings\My Documents\Arduino\libraries\Voice/Voice.h:123: error: 'byte' does not name a type
In file included from sketch_jun21a.ino:8:
C:\Documents and Settings\My Documents\Arduino\libraries\Syn6288/Syn6288.h:19: error: 'byte' does not name a type
sketch_jun21a.ino: In function 'void finally(unsigned char)':
sketch_jun21a:116: error: invalid conversion from 'int8_t*' to 'uint8_t*'
sketch_jun21a:116: error: initializing argument 1 of 'void Syn6288::play(uint8_t*, uint8_t, uint8_t)'
sketch_jun21a:119: error: invalid conversion from 'int8_t*' to 'uint8_t*'
sketch_jun21a:119: error: initializing argument 1 of 'void Syn6288::play(uint8_t*, uint8_t, uint8_t)'
sketch_jun21a:125: error: invalid conversion from 'int8_t*' to 'uint8_t*'
sketch_jun21a:125: error: initializing argument 1 of 'void Syn6288::play(uint8_t*, uint8_t, uint8_t)'
sketch_jun21a.ino: In function 'void setup()':
sketch_jun21a:197: error: 'VoiceRecognitionV1' was not declared in this scope

futuremeng 发表于 2014-3-4 15:55:44

语音识别和语音合成做到一块板子上或者，前者可以插后者，这样就好了。另外，语音识别占用的IO好多，是否可以用I2C呢？

chu 发表于 2014-3-24 14:06:50

可以增加语音识别开关窗帘吗？也就是增加两个语音控制继电器？

Youyou 发表于 2014-3-24 17:37:27

chu 发表于 2014-3-24 14:06
可以增加语音识别开关窗帘吗？也就是增加两个语音控制继电器？

这是完全可以的，设置开或关窗帘的关键字，在程序中设置好触发就基本可以了。

Grey 发表于 2014-3-24 18:21:48

Youyou 发表于 2014-3-24 17:37
这是完全可以的，设置开或关窗帘的关键字，在程序中设置好触发就基本可以了。 ...

它没有那么灵敏，一般开口音还可以，其他的有点困难。
需要设置其他容易辨认的关键字才能识别。

mickey 发表于 2014-4-22 14:29:54

futuremeng 发表于 2014-3-4 15:55
语音识别和语音合成做到一块板子上或者，前者可以插后者，这样就好了。另外，语音识别占用的IO好多，是否可 ...
其实我们还有一个产品，就完全是你想要的，请见链接：https://www.dfrobot.com.cn/goods-633.html
IIC的语音识别芯片没有哦，都是SPI的。

futuremeng 发表于 2014-5-17 00:45:53

mickey 发表于 2014-4-22 14:29
其实我们还有一个产品，就完全是你想要的，请见链接：https://www.dfrobot.com.cn/goods-633.html
IIC的语 ...
这个好，当初没有发现

Jerrykyu 发表于 2021-5-28 23:32:38

语音识别功能好像无法解决一个实际问题，即通过实时语音判断结果跳出一个动作循环语句。比如我想通过语音识别结果，实现对开灯，关灯和闪烁三种状态的实时切换时，好像就无法实现了。开灯和关灯这两个动作不是循环语句，很容易就实现了，但闪烁是一个循环执行语句，一旦通过语音识别进入闪烁模式后，即进入了二级动作子循环，就无法再正常执行语音识别了。mind+程序如下，一旦进入闪烁就进入跳不出来了，自己才疏学浅，一直也没想出比较好的解决方案...

克梦发表于 2021-8-19 09:49:01

Jerrykyu 发表于 2021-5-28 23:32
语音识别功能好像无法解决一个实际问题，即通过实时语音判断结果跳出一个动作循环语句。比如我想通过语音 ...

把语音识别放在循环里

页: [1]

DF创客社区 - 分享创造的喜悦's Archiver

DFRobot Arduino Smart Home kit智能家居语音识别