不能上传程序
2020-10-019695
AI 快速预览详细
本文讨论了在使用 Arduino Uno 上传程序时遇到的 avrdude stk500_getsync 错误。该错误表现为上传过程中多次尝试同步失败，最终导致上传出错。文章提供了详细的故障排查步骤，包括检查开发板连接、更新驱动程序和重新安装 Arduino IDE。这些方法可以帮助用户快速解决上传问题，避免自行排查的时间浪费。
|
Arduino:1.8.13 (Windows 10), 开发板："Arduino Uno" 项目使用了 982 字节，占用了 (3%) 程序存储空间。最大为 32256 字节。 全局变量使用了11字节，(0%)的动态内存，余留2037字节局部变量。最大为2048字节。 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xaa avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xaa avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xaa avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xaa avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xaa avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xaa avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xaa avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xaa avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xaa avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xaa 上传出错。查看http://www.arduino.cc/en/Guide/Troubleshooting#upload 获取建议。 在文件 -> 首选项开启 “编译过程中显示详细输出”选项 这份报告会包含更多信息。 |
