【花雕动手做】ASRPRO语音识别（24）---PT0603光敏模块控制屏幕

本例实验采用PT0603光敏三极管


电原理图



产品特性 / PRODUCT FEATURES
封装胶水：无色透明硅胶
外观尺寸（L/W/H）：1.6*0.8*0.6mm
焊线材质：金线/合金线
感光峰值波段：850nm
感光范围：400-1050nm
发光角度：120度
EIA规范标准包装
环保产品，符合ROHS标准要求

本例实验的SPI彩色液晶1.77寸显示屏（ST7735驱动）
TFT177-SPI，型号为SX177QQVGA，像素128X160TFT，驱动芯片为ST7735S，这是一款支持SPI接口的1.77寸TFT彩屏，可以显示文字、图形、图片等内容，提高用户互动体验度。



电原理图




【花雕动手做】实验二十九：PT0603光敏三极管检测环境亮度控制ST7735彩屏
实验开源代码

#define ASC2_12
#define ST7735_CS_PIN 9
#define ST7735_CS_GPIO_PIN gpio_pin_1
#define ST7735_DC_PIN 1
#define ST7735_DC_GPIO_PIN gpio_pin_1
#define ST7735_RST_PIN 25
#define ST7735_RST_GPIO_PIN gpio_pin_1
#define ST7735_SCK_PIN 3
#define ST7735_SCK_GPIO_PIN gpio_pin_3
#define ST7735_MOSI_PIN 2
#define ST7735_MOSI_GPIO_PIN gpio_pin_2
#define ASC2_32
#define ST7735S_RGB_GBR_ORDER   0

#include "asr.h"
extern "C"{ void * __dso_handle = 0 ;}
#include "setup.h"
#include "myLib/asr_st7735.h"
#include "myLib/asr_event.h"
#include "myLib/asr_ws2812.h"

uint32_t snid;
uint16_t liangdu;
void pins_attached();
void hardware_init();

SPITFT spi_tft(128, 160);
WS2812 ASR_WS2812_27(27);
//{ID:250,keyword:"命令词",ASR:"最大音量",ASRTO:"音量调整到最大"}
//{ID:251,keyword:"命令词",ASR:"中等音量",ASRTO:"音量调整到中等"}
//{ID:252,keyword:"命令词",ASR:"最小音量",ASRTO:"音量调整到最小"}
void pins_attached(){
  while (1) {
    if((adc_read(17) < 300)){
      delay(200);
      enter_wakeup(3000);
      delay(200);
      spi_tft.clear((0xFFFF));
      spi_tft.set_text_color((0x001F),(0xFFFF));
      spi_tft.set_cursor(0,30);
      spi_tft.draw_hanzi_32("光照度为");
      //{ID:500,keyword:"命令词",ASR:"耍接官",ASRTO:"光照度为"}
      play_audio(500);
      delay(800);
      liangdu = adc_read(17);
      play_num((int64_t)(liangdu * 100), 1);
      spi_tft.set_text_color((0xF800),(0xFFFF));
      spi_tft.set_cursor(35,65);
      spi_tft.set_text_size(32);
      spi_tft.println((String(liangdu)));
      delay(800);
      spi_tft.set_text_color((0x001F),(0xFFFF));
      spi_tft.set_cursor(15,100);
      //{ID:501,keyword:"命令词",ASR:"接耍官",ASRTO:"天黑了，关门睡觉吧"}
      play_audio(501);
      spi_tft.draw_hanzi_24("天黑睡觉");
      delay(7000);
    }
    delay(1);
  }
  vTaskDelete(NULL);
}

void ASR_CODE()
{
  //{ID:502,keyword:"唤醒词",ASR:"当前亮度",ASRTO:"开始测量"}
  if(snid == 502){
    digital_write((21),1);
    ASR_WS2812_27.setBrightness(30);
    ASR_WS2812_27.pixel_set_all_color(255,0,0);
    ASR_WS2812_27.pixel_show();
    spi_tft.clear((0x001F));
    spi_tft.set_text_color((0xFFFF),(0x001F));
    delay(800);
    spi_tft.set_cursor(0,40);
    spi_tft.draw_hanzi_32("环境亮度");
    delay(800);
    spi_tft.set_cursor(35,80);
    spi_tft.set_text_size(32);
    liangdu = adc_read(17);
    spi_tft.println((String(liangdu)));
    //{ID:503,keyword:"命令词",ASR:"官耍接",ASRTO:"环境亮度"}
    play_audio(503);
    play_num((int64_t)(liangdu * 100), 1);
    delay(800);
  }
  //{ID:504,keyword:"唤醒词",ASR:"智能管家",ASRTO:"我在"}
  if(snid == 504){
    digital_write((21),1);
    ASR_WS2812_27.setBrightness(30);
    ASR_WS2812_27.pixel_set_all_color(0,255,0);
    ASR_WS2812_27.pixel_show();
    spi_tft.clear((0xF800));
    spi_tft.set_text_color((0xFFFF),(0xF800));
    delay(800);
    spi_tft.set_cursor(15,40);
    spi_tft.draw_hanzi_24("有什么事");
    delay(800);
    spi_tft.set_cursor(28,80);
    spi_tft.draw_hanzi_24("请吩咐");
  }
  //{ID:505,keyword:"命令词",ASR:"效果不错",ASRTO:"有你的鼓励真好，谢谢啦！"}
  if(snid == 505){

  }
}

void hardware_init(){
  spi_tft.init();
  digital_write((21),0);
  spi_tft.set_direction(2);
  spi_tft.set_text_wrap(true);
  spi_tft.set_text_size(32);
  spi_tft.set_bg_mode(1);
  ASR_WS2812_27.pixel_init(3);
  xTaskCreate(pins_attached,"pins_attached",256,NULL,4,NULL);
  vTaskDelete(NULL);
}

void setup()
{
  //{speak:小美-娇美女声,vol:20,speed:10,platform:haohaodada}
  //{playid:10001,voice:欢迎使用人工智能AI语音助手，用智能管家唤醒我}
  //{playid:10002,voice:我退下了}

  //{ID:84,keyword:"命令词",ASR:"条耍改",ASRTO:"零"}
  //{ID:85,keyword:"命令词",ASR:"官接思",ASRTO:"一"}
  //{ID:86,keyword:"命令词",ASR:"痛官松",ASRTO:"二"}
  //{ID:87,keyword:"命令词",ASR:"削丝误",ASRTO:"三"}
  //{ID:88,keyword:"命令词",ASR:"景粮载",ASRTO:"四"}
  //{ID:89,keyword:"命令词",ASR:"博菌避",ASRTO:"五"}
  //{ID:90,keyword:"命令词",ASR:"裁纯碉",ASRTO:"六"}
  //{ID:91,keyword:"命令词",ASR:"插趣悟",ASRTO:"七"}
  //{ID:92,keyword:"命令词",ASR:"辞暖慌",ASRTO:"八"}
  //{ID:93,keyword:"命令词",ASR:"纵猛淡",ASRTO:"九"}
  //{ID:94,keyword:"命令词",ASR:"锦耗暂",ASRTO:"十"}
  //{ID:95,keyword:"命令词",ASR:"燃智截",ASRTO:"百"}
  //{ID:96,keyword:"命令词",ASR:"佛驻延",ASRTO:"千"}
  //{ID:97,keyword:"命令词",ASR:"隔枪绍",ASRTO:"万"}
  //{ID:98,keyword:"命令词",ASR:"惨愤昂",ASRTO:"亿"}
  //{ID:99,keyword:"命令词",ASR:"丙迈扯",ASRTO:"负"}
  //{ID:100,keyword:"命令词",ASR:"铸猜隆",ASRTO:"点"}
  xTaskCreate(hardware_init,"hardware_init",256,NULL,100,NULL);
}
复制代码

训练模型与编译烧录





实验记录视频


https://www.bilibili.com/video/BV1jt4y1Z7XS/?share_source=copy_web&vd_source=371a292a55e5ca9be994cbb4a86cc987