掌控板2.2.0的自带程序
掌控板2.2.0里面有自带程序，可是如何获取自带的程序？求助大佬回答是出场默认的那个程序吗？mind+中打开文件系统，那个main.py应该就是了 qrm 发表于 2023-4-15 22:20
是出场默认的那个程序吗？mind+中打开文件系统，那个main.py应该就是了
好的谢谢 那个main.py程序是转到mpythondemo。 代码我复制一下：#mPythonType:0
# # exec(open('./mPythonFactorytest_2_0.py').read(),globals())
# exec(open('./mPythonDemo.py').read(),globals())
# Flappy Bird game for mPython
# frok from github.com/zelacerda/micropython ,2017 - by zelacerda
# modify from LabPlus@Tangliufeng
import ntptime
from mpython import*
from machine import Timer,RTC
import _thread
from random import randint
from math import sin, cos
have_magnetics = True if 48 in i2c.scan() else False
data=(2018, 12, 15, 6, 8,30, 0, 0)
RTC().datetime(data)
clock=Clock(oled,64,32,30)
mode=0
modeNum=5
if have_magnetics: modeNum+=1
Center_x=63
Center_y=31
# 绘制罗盘中心坐标和半径
xc,yc,comp_r= 64,32,30
is_calibrate = False
def draw_heading(angle):
"""绘制磁北指针"""
global xc,yc,comp_r
angle = 360 - angle
am = math.pi * 2.0 * angle / 360
xm = round(xc + comp_r * math.sin(am))
ym = round(yc - comp_r * math.cos(am))
oled.line(xc, yc, xm, ym, 1)
def scanBtnThread(_):
global mode
aState=0
bState=0
lastaState =0
lastbState =0
while True:
try:
aState=button_a.value()
bState=button_b.value()
if aState!=lastaState:
sleep_ms(20)
if aState==0:
mode=mode-1
mode=mode % modeNum
print("mode:%d" %mode)
lastaState=aState
if bState!=lastbState:
sleep_ms(20)
if bState==0:
mode=mode+1
mode=mode % modeNum
print("mode:%d" %mode)
lastbState=bState
except KeyboardInterrupt:
_thread.exit()
# break
_thread.start_new_thread(scanBtnThread,(1,))
def Refresh(_):
if mode ==0:
oled.DispChar("钟表",0,0)
clock.settime()
clock.drawClock()
oled.show()
oled.fill(0)
tim1 = Timer(1)
tim1.init(period=1000, mode=Timer.PERIODIC, callback=Refresh)
class snow():
def __init__(self):
self.x = randint(0,127) #随机生成雪花的起始坐标点
self.y = randint(0,10)
self.r = randint(1,2) #随机生成雪花的半径大小
self.vx = randint(-2,2) #随机生成雪花的x,y移动路径
self.vy = randint(1,3)
def refresh(self):
self.x += self.vx #下移坐标，雪花落下
self.y += self.vy
if self.x > 128 or self.x < 0:
self.x = randint(0,127)
if self.y > 63 or self.y < 0:
self.y = 0
def run(self):
self.refresh()
oled.fill_circle(self.x,self.y,self.r,1) #画雪花
balls = []
for x in range(20): #生成20个雪花点
balls.append(snow())
import music # 导入music模块
note=["C4:2","D4:2","E4:2","F4:2","G4:2","A4:2","B4:2"] # 定义7音阶的元组
pStatus,yStatus,tStatus,hStatus,oStatus,nStatus,p0Status=*7# 按键状态标记变量
p0 = TouchPad(Pin(33)) # 由于掌控板上的触摸按键只有6个，还需拓展多一个引脚P0，对应ESP32的IO33
def drawPiano(x,y,w,h,num):
if num==0:
for i in range(7):
oled.rect((x+i*w),y,w,h,1)
else:
oled.fill_rect((x+(num-1)*w),y,w,h,1)
X = const(64)
Y = const(32)
f = [ for _ in range(8)]
cube = ((-20,-20, 20), (20,-20, 20), (20,20, 20), (-20,20, 20),
(-20,-20,-20), (20,-20,-20), (20,20,-20), (-20,20,-20))
while True:
if mode ==1:
oled.text("level",0,0)
x=accelerometer.get_x()
y=accelerometer.get_y()
if y<=1 and y>=-1:
offsetX=int(numberMap(y,1,-1,-64,64))
if x<=1 and x>=-1:
offsetY=int(numberMap(x,1,-1,32,-32))
move_x=Center_x+offsetX
move_y=Center_y+offsetY
oled.circle(Center_x,Center_y,6,1)
oled.fill_circle(move_x,move_y,4,1)
oled.text("%0.1f,%0.1f" %(x,y),60,0)
if offsetX==0 and offsetY==0:
rgb.fill((0,10,0))
rgb.write()
else:
rgb.fill((0,0,0))
rgb.write()
oled.show()
oled.fill(0)
if mode ==2:
oled.DispChar("钢琴",0,0)
drawPiano(28,20,10,35,0)
if touchPad_P.read()<100 and pStatus==1: # 检测按键按下和判断按键标记
music.play(note,wait=False) # 播放音符
drawPiano(28,20,10,35,1)
pStatus=0 # 按键标记置0
elif touchPad_P.read()>=100:
pStatus=1
if touchPad_Y.read()<100 and yStatus==1:
music.play(note,wait=False)
drawPiano(28,20,10,35,2)
yStatus=0
elif touchPad_Y.read()>=100:
yStatus=1
if touchPad_T.read()<100 and tStatus==1:
music.play(note,wait=False)
drawPiano(28,20,10,35,3)
tStatus=0
elif touchPad_T.read()>=100:
tStatus=1
if touchPad_H.read()<100 and hStatus==1:
music.play(note,wait=False)
drawPiano(28,20,10,35,4)
hStatus=0
elif touchPad_H.read()>=100:
hStatus=1
if touchPad_O.read()<100 and oStatus==1:
music.play(note,wait=False)
drawPiano(28,20,10,35,5)
oStatus=0
elif touchPad_O.read()>=100:
oStatus=1
if touchPad_N.read()<100 and nStatus==1:
music.play(note,wait=False)
drawPiano(28,20,10,35,6)
nStatus=0
elif touchPad_N.read()>=100:
nStatus=1
if p0.read()<100 and p0Status==1:
music.play(note,wait=False)
drawPiano(28,20,10,35,7)
p0Status=0
elif p0.read()>=100:
p0Status=1
oled.show()
oled.fill(0)
if mode ==3:
oled.DispChar("飘雪",0,0)
for b in balls: #雪花落下
b.run()
oled.show() #显示oled
oled.fill(0) #清屏
sleep_ms(50) #刷新时间
if mode ==4:
prevmode=mode
for angle in range(0, 361, 5):# 0 to 360 deg 3step
if prevmode !=mode:
break
for i in range(8):
r= angle * 0.0174532# 1 degree
x1 = cube * sin(r) + cube * cos(r)# rotate Y
ya = cube
z1 = cube * cos(r) - cube * sin(r)
x2 = x1
y2 = ya * cos(r) - z1 * sin(r)# rotate X
z2 = ya * sin(r) + z1 * cos(r)
x3 = x2 * cos(r) - y2 * sin(r)# rotate Z
y3 = x2 * sin(r) + y2 * cos(r)
z3 = z2
x3 = x3 + X
y3 = y3 + Y
f = x3# store new values
f = y3
f = z3
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)
oled.line(int(f), int(f), int(f), int(f), 1)# cross
oled.line(int(f), int(f), int(f), int(f), 1)# cross
oled.DispChar('3D cube', 0, 0)
oled.show()# display
oled.fill(0)# clear
if mode == 5 and have_magnetics:
prevmode=mode
oled.DispChar('指北针',0,0)
# 电子罗盘校准
if not is_calibrate:
magnetic.calibrate()
is_calibrate =True
# sleep(2)
oled.DispChar('指北针',0,0)
# 绘制罗盘轮廓
oled.circle(xc, yc, comp_r+1, 1)
oled.show()
while True:
if prevmode !=mode:
oled.fill(0)
break
# 获取磁力计电子罗盘角度
angle = magnetic.get_heading()
# 清除指针
oled.fill_circle(xc, yc, comp_r, 0)
oled.fill_rect(95,0,30,16,0)
# 显示罗盘指针
draw_heading(angle)
oled.text("d" %angle,95,0)
oled.show()
print("磁北极夹角: %d" %angle)
三春牛-创客 发表于 2023-6-9 15:15
代码我复制一下：
哦！谢谢了！ 快看擎天猪 发表于 2023-6-10 22:36
哦！谢谢了！
不用谢。 快看擎天猪 发表于 2023-6-10 22:36
哦！谢谢了！
之前我看掌控板文件时找到的 mpythondemo程序。 这里面的知识还挺多的。研究了好久……
页:
[1]