【花雕动手做】ASRPRO语音识别（59）---科普航母模型小智盒子

#include "asr.h"
extern "C"{ void * __dso_handle = 0 ;}
#include "setup.h"

uint32_t snid;
void ASR_CODE();
void hardware_init();

/*描述该功能...
*/
void ASR_CODE(){
  set_state_enter_wakeup(15000);
  switch (snid) {
   case 0:
    digitalWrite(4,0);
    break;
   case 1:
    digitalWrite(2,0);
    break;
   case 2:
    digitalWrite(2,1);
    break;
   case 3:
    digitalWrite(3,0);
    break;
   case 4:
    digitalWrite(3,1);
    break;
   case 5:
    digitalWrite(5,0);
    break;
   case 6:
    digitalWrite(5,1);
    break;
   case 7:
    digitalWrite(6,0);
    break;
   case 8:
    digitalWrite(6,1);
    break;
   case 9:
    digitalWrite(2,0);
    digitalWrite(3,0);
    digitalWrite(5,0);
    digitalWrite(6,0);
    break;
   case 10:
    digitalWrite(2,1);
    digitalWrite(3,1);
    digitalWrite(5,1);
    digitalWrite(6,1);
    break;
  }
  delay(100);
  //{ID:500,keyword:"唤醒词",ASR:"小智盒子",ASRTO:"金港湾欢迎您的到来！"}
  if(snid == 500){
    digitalWrite(4,0);
  }
  //{ID:501,keyword:"命令词",ASR:"效果不错",ASRTO:"谢谢大家的支持和鼓励！"}
  if(snid == 501){

  }
}

//{ID:250,keyword:"命令词",ASR:"最大音量",ASRTO:"音量调整到最大"}
//{ID:251,keyword:"命令词",ASR:"中等音量",ASRTO:"音量调整到中等"}
//{ID:252,keyword:"命令词",ASR:"最小音量",ASRTO:"音量调整到最小"}
void sys_sleep_hook()
{
  digitalWrite(4,1);

}

void hardware_init(){
  pinMode(4,output);
  digitalWrite(4,1);
  vTaskDelete(NULL);
}

void setup()
{
  //{speak:小爱-活泼女声,vol:18,speed:10,platform:haohaodada,version:V3}
  //{playid:10001,voice:欢迎使用人工智能AI语音助手，用航母管家唤醒我}
  //{playid:10002,voice:我退下了}
  //{ID:0,keyword:"唤醒词",ASR:"航母管家",ASRTO:"欢迎光临金港湾航母基地"}
  //{ID:1,keyword:"命令词",ASR:"一级战备",ASRTO:"已打开警报系统，全舰集合"}
  //{ID:2,keyword:"命令词",ASR:"解除警报",ASRTO:"已经解除，全体休息"}
  //{ID:3,keyword:"命令词",ASR:"战机出库",ASRTO:"打开智能绞盘，飞机升到甲板"}
  //{ID:4,keyword:"命令词",ASR:"战机入库",ASRTO:"打开甲板口，放下飞机回到机库"}
  //{ID:5,keyword:"命令词",ASR:"打开滑行灯",ASRTO:"已经打开三通道舰面跑道滑行灯"}
  //{ID:6,keyword:"命令词",ASR:"关闭滑行灯",ASRTO:"飞行任务结束，已关闭跑道灯"}
  //{ID:7,keyword:"命令词",ASR:"弹射起飞",ASRTO:"打开电磁弹射器，战机弹射起飞"}
  //{ID:8,keyword:"命令词",ASR:"设备收回",ASRTO:"开始快速充电，为下次起飞做准备"}
  //{ID:9,keyword:"命令词",ASR:"全部打开",ASRTO:"测试！测试！打开所有装备"}
  //{ID:10,keyword:"命令词",ASR:"全部关闭",ASRTO:"已关闭所有装备"}
  pinMode(2,output);
  digitalWrite(2,1);
  pinMode(3,output);
  digitalWrite(3,1);
  pinMode(5,output);
  digitalWrite(5,1);
  pinMode(6,output);
  digitalWrite(6,1);
  xTaskCreate(hardware_init,"hardware_init",256,NULL,100,NULL);
}
复制代码