5427浏览
查看: 5427|回复: 2

[资讯] 3D打印号角式音箱

[复制链接]
转自3ders.org   原文链接:http://www.3ders.org/articles/20 ... -free-download.htmlFirst 3D printed wooden Spirula speakers, model available for free download3D打印号角式音箱图3

A team of design and technology enthusiasts at Akemake has created a beautiful speaker using 3D printing and wood filament. If you have your own 3D printer to make some of the components, this beautiful speaker can be built for just $120 in parts and materials.
Inspired by the shape of the internal shell of spirula, a species of deep water squid-like cephalopod mollusk known as ram's horn squid, designer Ondra Chotovinsky of Akemake designed and printed the Spirula parts in just 18 hours, more specifically 2 x 9hrs.
3D打印号角式音箱图1
"We print these speaker without support because we want to achieve the highest possible quality of the exposed surface and maintain the clarity of the printing pattern which makes it so unique." said Machal Kandler of Akemake.
Afterwards both printed halves were bonded together using 2-component adhesive. "Assembly time is about two hours. This includes: bonding, bit of soldering and assembling components together (4" driver, 3 feet, audio connectors & cables)." Kandler explained.
3D打印号角式音箱图4
The wood filament used for the Spirula 4.0 is Timberfill made by Fillamentum, "a material made from 100% natural materials and biodegradable in nature," according to the site. It sounds similiar as the Laywood-D3, a wood-based 3D printing filament invented by Kai Parthy, which contains 40% recycled wood and harmless binding polymers. After printing it looks and smells like wood and can also be handled like wood.
"The weight of one speaker (without components) is roughly 650g, so it can printed out from one Timberfill roll." Kandler told us. "The printing cost is approximately $52 (again, purely the material per one speaker)."
3D打印号角式音箱图2
As to the total cost, Kandler said Akemake has selected and used only the components which are available worldwide. For example:
  • Spirula Speaker from Timberfill - 52$ (USD)
  • Driver - W4-1052SDF - $40 (USD)
  • Spikes - SPS35/SC - $22 (USD) per 4pcs
  • RCA connectors - $7 (USD) per pair
So the total cost can be approximately $120 USD / per one speaker (no labor & printing time considered).
This 3D printed model is the first speaker in the world printed from wood filament, says Kandler. The model is now available on Akemake website for free download, and will only be printed in really low volume depending on online demand.
You can visit Akemake and see Spirula speakers exhibited on Design Terminal in Budapest (5-7 June www.designterminal.com), 3D Printshow in London (4-6 Sept, 3dprintshow.com) and TCT show in Birmingham (30 Sept – 2 Oct www.tctshow.com).



苦海  初级技匠

发表于 2015-1-28 12:21:55

太大了。。。。打不了。。。
回复

使用道具 举报

Jane  高级技匠

发表于 2015-1-29 10:22:12

样子很炫呀
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

为本项目制作心愿单
购买心愿单
心愿单 编辑
[[wsData.name]]

硬件清单

  • [[d.name]]
btnicon
我也要做!
点击进入购买页面
上海智位机器人股份有限公司 沪ICP备09038501号-4

© 2013-2024 Comsenz Inc. Powered by Discuz! X3.4 Licensed

mail