liujz 发表于 2024-4-25 19:13:15

求助大佬

tcs230颜色识别器识别颜色，接的arduino uno板上传代码时出现这种情况，不知道该怎么处理
Sketch uses 2796 bytes (8%) of program storage space. Maximum is 32256 bytes.
Global variables use 232 bytes (11%) of dynamic memory, leaving 1816 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
Failed uploading: uploading error: exit status 1

YeezB 发表于 2024-4-29 13:41:44

电脑连接不上Arduino，换一个USB线，电脑，重装串口驱动。
还是不行的话换个Arduino试试看。

刘骏森 发表于 2024-10-1 15:23:48

是Arduino与电脑连接超时，不是程序问题
页: [1]
查看完整版本: 求助大佬