测试固件2.1.5 beta 2
2015-06-188660
AI 快速预览详细
OverLord 2.1.5 Beta 2 固件更新是针对OverLord和OverLord Pro 3D打印机的最新测试版固件。它修复了多个问题，包括自动调平、手动调平、OLED屏幕偏移和冻结等。此外，还改进了恢复打印功能，解决了“SD搜索过长”和床温无法加热的问题。请注意，此固件未完全测试，使用前请备份数据并进行出厂重置。
|
This is the latest beta firmware of OverLord and OverLord Pro. Be careful when you try this firmware! It is not fully tested and may damage your printer. However it refines many aspects including the auto level, manual level, edge warp, OLED stuck, resume print ,and so on. If you have some ideas or some feedbacks, please feel free to contact us. Our firmware will be open-sourced in the late fall. And before that we will try our best to improve the software and tidy up all the code~ Note: After update, please do Factory Reset. Overlord Version 2.1.5 beta 2: https://github.com/jimaobian/OverlordFirmware/raw/master/Version%202.1.5M%20-beta%202.hex Overlord Pro Version 2.1.5 beta 2: https://github.com/jimaobian/OverlordFirmware/raw/master/Version%202.1.5P%20-beta%202.hex Update List: Refine Resume Print ("SD search Too long") Fix the OLED screen offset Fix the time display during printing Fix the OLED Frozen problem Refine the Auto Level Refine the Manual Level Fix the bed cannot heat in some rarely condition |
