The Internet Of Led Wall!
2016-05-261.6万
AI 快速预览详细
互联网LED墙是一个使用Wio节点通过互联网远程控制的项目。它由30个LED条组成，每个LED条有10个LED灯。通过激光切割木板固定LED条，并配置Wio节点的I/O接口。连接LED条到Grove接口后，用户可以选择要控制的LED数量并通过API发送参数，从而实现远程控制效果。即使相隔千里，也能通过直播观看控制效果。
|
Here is the lovely tiny LED wall I made with Wio nodes. Every one can control it through the internet. [图片已失效] There are 30 LED bars on the board, each bar has ten led. Every one in every where can control every bar he/she likes with the API of Wio link. Here is the step to implement the Internet Of Led Wall. 1.Use the laser cutting to make a wood board to fix every led bar in sequence. Here is the details of the laser cutting effect on a 5mm wood board. 2.configure every I/O of the wio link or wio node.There are 30 I/O for 30 led bars. Here I used wio node instead of wio link. [图片已失效] 3.Connect the led bar to wio node grove interface with grove wire. 4.Choose the number of the led you want to control, then send the relevant parameter to the API of the I/O. [图片已失效] 5.Then you will see the amazing effect of the tele-controlling experience.If you are thousands of miles away, you can see the effect through Live broadcast! The broadcast of my Internet Of Led Wall is here: https://www.seeed.cc/topic_detail.html?id=5560 |
？？？？？
[图片已失效]
板上有30个LED条，每个条有10个LED。每个人在任何地方都可以通过Wio link的API来控制他/她喜欢的每个酒吧。
下面是实现Led墙互联网的步骤。
1.用激光切割制作木板，将每个led条按顺序固定。
下面是在5mm木板上激光切割效果的细节。
2.配置wio链路或wio节点的每个I/O。30个led棒有30个I/O。
这里我使用了wio节点而不是wio链接
Do you have a video that shows it blinking ,it must be a fine spectacle lol
你有一个视频显示它闪烁，这一定是一个很好的奇观，哈哈