驴友花雕 发表于 2024-1-2 14:39:22

【花雕动手做】ASRPRO语音识别(21)---报亮度温湿度的气象站

本帖最后由 驴友花雕 于 2024-1-3 07:39 编辑

本例实验的SPI彩色液晶1.77寸显示屏(ST7735驱动)
TFT177-SPI,型号为SX177QQVGA,像素128X160TFT,驱动芯片为ST7735S,这是一款支持SPI接口的1.77寸TFT彩屏,可以显示文字、图形、图片等内容,提高用户互动体验度。



电原理图



本例实验采用PT0603光敏三极管



电原理图



产品特性 / PRODUCT FEATURES
封装胶水:无色透明硅胶
外观尺寸(L/W/H):1.6*0.8*0.6mm
焊线材质:金线/合金线
感光峰值波段:850nm
感光范围:400-1050nm
发光角度:120度
EIA规范标准包装
环保产品,符合ROHS标准要求

本例实验采用DHT11
是一款含有已校准数字信号输出的温湿度复合传感器。它应用专用的数字模块采集技术和温湿度传感技术,确保产品具有极高的可靠性与卓越的长期稳定性。传感器包括一个电阻式感湿元件和一个NTC测温元件,并与一个高性能8位单片机相连接。因此该产品具有品质卓越、超快响应、抗干扰能力强、性价比极高等优点。每个DHT11传感器都在极为精确的湿度校验室中进行校准。校准系数以程序的形式储存在OTP内存中,传感器内部在检测信号的处理过程中要调用这些校准系数。单线制串行接口,使系统集成变得简易快捷。超小的体积、极低的功耗,信号传输距离可达20米以上,使其成为各类应用甚至最为苛刻的应用场合的最佳选则。产品为4针单排引脚封装。连接方便,特殊封装形式可根据用户需求而提供。


电原理图



【花雕动手做】实验二十六:自动报出亮度、温度与湿度的简易气象站
实验开源代码

#define ASC2_12
#define ST7735_CS_PIN 9
#define ST7735_CS_GPIO_PIN gpio_pin_1
#define ST7735_DC_PIN 1
#define ST7735_DC_GPIO_PIN gpio_pin_1
#define ST7735_RST_PIN 25
#define ST7735_RST_GPIO_PIN gpio_pin_1
#define ST7735_SCK_PIN 3
#define ST7735_SCK_GPIO_PIN gpio_pin_3
#define ST7735_MOSI_PIN 2
#define ST7735_MOSI_GPIO_PIN gpio_pin_2
#define ASC2_32
#define ST7735S_RGB_GBR_ORDER   0
#define ASC2_16

#include "asr.h"
extern "C"{ void * __dso_handle = 0 ;}
#include "setup.h"
#include "myLib/asr_st7735.h"
#include "myLib/asr_dhtxx.h"
#include "myLib/asr_event.h"

uint32_t snid;
uint8_t wen;
uint8_t shi;
uint16_t liang;
void hardware_init();

SPITFT spi_tft(128, 160);
//{ID:250,keyword:"命令词",ASR:"最大音量",ASRTO:"音量调整到最大"}
//{ID:251,keyword:"命令词",ASR:"中等音量",ASRTO:"音量调整到中等"}
//{ID:252,keyword:"命令词",ASR:"最小音量",ASRTO:"音量调整到最小"}
DHTxx asr_dht_7(7, DHT11);
void ASR_CODE()
{
//{ID:500,keyword:"命令词",ASR:"语音播报",ASRTO:""}
if(snid == 500){
    spi_tft.clear((0xFFFF));
    spi_tft.set_text_color((0x001F),(0xFFFF));
    spi_tft.set_cursor(30,20);
    spi_tft.draw_hanzi_16("当前温度");
    delay(1000);
    wen = asr_dht_7.read_temperature(0);
    spi_tft.set_cursor(55,40);
    spi_tft.set_text_size(16);
    spi_tft.println((String(wen)));
    //{ID:501,keyword:"命令词",ASR:"耍接官",ASRTO:"当前温度为摄氏"}
    play_audio(501);
    play_num((int64_t)(wen * 100), 1);
    //{ID:502,keyword:"命令词",ASR:"接耍官",ASRTO:"度"}
    play_audio(502);
    delay(2000);
    spi_tft.set_text_color((0x001F),(0xFFFF));
    spi_tft.set_cursor(30,60);
    spi_tft.draw_hanzi_16("当前湿度");
    delay(1000);
    shi = asr_dht_7.read_temperature(1);
    spi_tft.set_cursor(55,80);
    spi_tft.set_text_size(16);
    spi_tft.println((String(shi)));
    //{ID:503,keyword:"命令词",ASR:"官耍接",ASRTO:"当前湿度为百分之"}
    play_audio(503);
    play_num((int64_t)(shi * 100), 1);
    delay(2000);
    spi_tft.set_text_color((0x001F),(0xFFFF));
    spi_tft.set_cursor(30,100);
    spi_tft.draw_hanzi_16("当前亮度");
    delay(1000);
    liang = adc_read(17);
    spi_tft.set_cursor(45,120);
    spi_tft.set_text_size(16);
    spi_tft.println((String(liang)));
    //{ID:504,keyword:"命令词",ASR:"丝耍接",ASRTO:"当前亮度为"}
    play_audio(504);
    play_num((int64_t)(liang * 100), 1);
}
//{ID:505,keyword:"唤醒词",ASR:"智能气象站",ASRTO:"我在"}
if(snid == 505){
    digital_write((21),1);
    spi_tft.clear((0xFC40));
}
//{ID:506,keyword:"命令词",ASR:"太棒了",ASRTO:"谢谢鼓励,欢迎再次光临"}
if(snid == 506){

}
//{ID:507,keyword:"命令词",ASR:"当前温度",ASRTO:""}
if(snid == 507){
    spi_tft.clear((0xF800));
    spi_tft.set_text_color((0xFFFF),(0xF800));
    spi_tft.set_cursor(30,50);
    spi_tft.draw_hanzi_16("当前温度");
    delay(1000);
    wen = asr_dht_7.read_temperature(0);
    spi_tft.set_cursor(55,80);
    spi_tft.set_text_size(16);
    spi_tft.println((String(wen)));
    //{ID:508,keyword:"命令词",ASR:"粮耍接",ASRTO:"当前温度为摄氏"}
    play_audio(508);
    play_num((int64_t)(wen * 100), 1);
    //{ID:509,keyword:"命令词",ASR:"菌耍接",ASRTO:"度"}
    play_audio(509);
}
//{ID:510,keyword:"命令词",ASR:"当前亮度",ASRTO:""}
if(snid == 510){
    spi_tft.clear((0xF800));
    spi_tft.set_text_color((0xFFFF),(0xF800));
    spi_tft.set_cursor(30,50);
    spi_tft.draw_hanzi_16("当前亮度");
    delay(1000);
    liang = adc_read(17);
    spi_tft.set_cursor(45,80);
    spi_tft.set_text_size(16);
    spi_tft.println((String(liang)));
    //{ID:511,keyword:"命令词",ASR:"纯耍接",ASRTO:"当前亮度为"}
    play_audio(511);
    play_num((int64_t)(liang * 100), 1);
}
//{ID:512,keyword:"命令词",ASR:"当前湿度",ASRTO:""}
if(snid == 512){
    spi_tft.clear((0xF800));
    spi_tft.set_text_color((0xFFFF),(0xF800));
    spi_tft.set_cursor(30,50);
    spi_tft.draw_hanzi_16("当前湿度");
    delay(1000);
    shi = asr_dht_7.read_temperature(1);
    spi_tft.set_cursor(55,80);
    spi_tft.set_text_size(16);
    spi_tft.println((String(shi)));
    //{ID:513,keyword:"命令词",ASR:"趣耍接",ASRTO:"当前湿度为百分之"}
    play_audio(513);
    play_num((int64_t)(shi * 100), 1);
}
}

void hardware_init(){
spi_tft.init();
spi_tft.set_direction(2);
spi_tft.set_text_wrap(true);
spi_tft.set_text_size(32);
spi_tft.set_bg_mode(1);
vTaskDelete(NULL);
}

void setup()
{

//{ID:84,keyword:"命令词",ASR:"条耍改",ASRTO:"零"}
//{ID:85,keyword:"命令词",ASR:"官接思",ASRTO:"一"}
//{ID:86,keyword:"命令词",ASR:"痛官松",ASRTO:"二"}
//{ID:87,keyword:"命令词",ASR:"削丝误",ASRTO:"三"}
//{ID:88,keyword:"命令词",ASR:"景粮载",ASRTO:"四"}
//{ID:89,keyword:"命令词",ASR:"博菌避",ASRTO:"五"}
//{ID:90,keyword:"命令词",ASR:"裁纯碉",ASRTO:"六"}
//{ID:91,keyword:"命令词",ASR:"插趣悟",ASRTO:"七"}
//{ID:92,keyword:"命令词",ASR:"辞暖慌",ASRTO:"八"}
//{ID:93,keyword:"命令词",ASR:"纵猛淡",ASRTO:"九"}
//{ID:94,keyword:"命令词",ASR:"锦耗暂",ASRTO:"十"}
//{ID:95,keyword:"命令词",ASR:"燃智截",ASRTO:"百"}
//{ID:96,keyword:"命令词",ASR:"佛驻延",ASRTO:"千"}
//{ID:97,keyword:"命令词",ASR:"隔枪绍",ASRTO:"万"}
//{ID:98,keyword:"命令词",ASR:"惨愤昂",ASRTO:"亿"}
//{ID:99,keyword:"命令词",ASR:"丙迈扯",ASRTO:"负"}
//{ID:100,keyword:"命令词",ASR:"铸猜隆",ASRTO:"点"}
//{speak:橙子-甜美客服,vol:20,speed:10,platform:haohaodada}
//{playid:10001,voice:欢迎使用人工智能AI语音助手,用智能气象站唤醒我}
//{playid:10002,voice:我退下了,用智能气象站唤醒我}
asr_dht_7.init();
digital_write((4),1);
digital_write((21),0);
xTaskCreate(hardware_init,"hardware_init",256,NULL,100,NULL);
}
训练模型与编译烧录





实验记录视频

https://www.bilibili.com/video/BV1AK411t77H/?share_source=copy_web&vd_source=371a292a55e5ca9be994cbb4a86cc987

https://www.bilibili.com/video/BV1AK411t77H/?share_source=copy_web&vd_source=371a292a55e5ca9be994cbb4a86cc987















木子呢 发表于 2024-1-2 15:24:52

感谢大佬分享

驴友花雕 发表于 2024-1-3 07:38:16

不敢当,谢谢老师的鼓励和支持!
页: [1]
查看完整版本: 【花雕动手做】ASRPRO语音识别(21)---报亮度温湿度的气象站