驴友花雕 发表于 2024-1-1 18:16:14

【花雕动手做】ASRPRO语音识别(20)---彩屏显示DHT11温湿度

本例实验采用DHT11
是一款含有已校准数字信号输出的温湿度复合传感器。它应用专用的数字模块采集技术和温湿度传感技术,确保产品具有极高的可靠性与卓越的长期稳定性。传感器包括一个电阻式感湿元件和一个NTC测温元件,并与一个高性能8位单片机相连接。因此该产品具有品质卓越、超快响应、抗干扰能力强、性价比极高等优点。每个DHT11传感器都在极为精确的湿度校验室中进行校准。校准系数以程序的形式储存在OTP内存中,传感器内部在检测信号的处理过程中要调用这些校准系数。单线制串行接口,使系统集成变得简易快捷。超小的体积、极低的功耗,信号传输距离可达20米以上,使其成为各类应用甚至最为苛刻的应用场合的最佳选则。产品为4针单排引脚封装。连接方便,特殊封装形式可根据用户需求而提供。


电原理图



本例实验采用板载三位独立按键,可以搭配实现各种相关的功能。



本例实验的SPI彩色液晶1.77寸显示屏(ST7735驱动)
TFT177-SPI,型号为SX177QQVGA,像素128X160TFT,驱动芯片为ST7735S,这是一款支持SPI接口的1.77寸TFT彩屏,可以显示文字、图形、图片等内容,提高用户互动体验度。



电原理图




【花雕动手做】实验二十五:使用按键和语音控制显示DHT11温度与湿度
实验开源代码

#define ASC2_12
#define ST7735_CS_PIN 9
#define ST7735_CS_GPIO_PIN gpio_pin_1
#define ST7735_DC_PIN 1
#define ST7735_DC_GPIO_PIN gpio_pin_1
#define ST7735_RST_PIN 25
#define ST7735_RST_GPIO_PIN gpio_pin_1
#define ST7735_SCK_PIN 3
#define ST7735_SCK_GPIO_PIN gpio_pin_3
#define ST7735_MOSI_PIN 2
#define ST7735_MOSI_GPIO_PIN gpio_pin_2
#define ASC2_32
#define ST7735S_RGB_GBR_ORDER   0
#define ASC2_16

#include "asr.h"
extern "C"{ void * __dso_handle = 0 ;}
#include "setup.h"
#include "myLib/asr_st7735.h"
#include "myLib/asr_event.h"
#include "myLib/asr_dhtxx.h"

uint32_t snid;
uint8_t wen;
uint8_t shi;
void pins_attached();
void hardware_init();

SPITFT spi_tft(128, 160);
//{ID:250,keyword:"命令词",ASR:"最大音量",ASRTO:"音量调整到最大"}
//{ID:251,keyword:"命令词",ASR:"中等音量",ASRTO:"音量调整到中等"}
//{ID:252,keyword:"命令词",ASR:"最小音量",ASRTO:"音量调整到最小"}
DHTxx asr_dht_7(7, DHT11);
void pins_attached(){
while (1) {
    if((digital_read((18)) == 0)){
      digital_write((21),1);
      delay(200);
      enter_wakeup(5000);
      delay(200);
      //{ID:500,keyword:"命令词",ASR:"耍接官",ASRTO:"按键模式读取温度"}
      play_audio(500);
      spi_tft.clear((0x8FFF));
      spi_tft.set_text_color((0x001F),(0x8FFF));
      spi_tft.set_cursor(30,50);
      spi_tft.draw_hanzi_16("当前温度");
      delay(1000);
      wen = asr_dht_7.read_temperature(0);
      spi_tft.set_cursor(55,80);
      spi_tft.set_text_size(16);
      spi_tft.println((String(wen)));
      //{ID:501,keyword:"命令词",ASR:"接耍官",ASRTO:"当前温度为摄氏"}
      play_audio(501);
      play_num((int64_t)(wen * 100), 1);
      //{ID:502,keyword:"命令词",ASR:"官耍接",ASRTO:"度"}
      play_audio(502);
    }
    if((digital_read((4)) == 0)){
      digital_write((21),1);
      delay(200);
      enter_wakeup(5000);
      delay(200);
      //{ID:503,keyword:"命令词",ASR:"丝耍接",ASRTO:"按键模式读取湿度"}
      play_audio(503);
      spi_tft.clear((0x8FFF));
      spi_tft.set_text_color((0xF800),(0x8FFF));
      spi_tft.set_cursor(30,50);
      spi_tft.draw_hanzi_16("当前湿度");
      delay(1000);
      shi = asr_dht_7.read_temperature(1);
      spi_tft.set_cursor(55,80);
      spi_tft.set_text_size(16);
      spi_tft.println((String(shi)));
      //{ID:504,keyword:"命令词",ASR:"粮耍接",ASRTO:"当前湿度为百分之"}
      play_audio(504);
      play_num((int64_t)(shi * 100), 1);
    }
    delay(1);
}
vTaskDelete(NULL);
}

void ASR_CODE()
{
//{ID:505,keyword:"命令词",ASR:"这个有用",ASRTO:"谢谢鼓励,给你了"}
if(snid == 505){

}
//{ID:506,keyword:"唤醒词",ASR:"智能管家",ASRTO:"我在"}
if(snid == 506){
    digital_write((21),1);
    spi_tft.clear((0xFFFF));
}
//{ID:507,keyword:"命令词",ASR:"当前温度",ASRTO:""}
if(snid == 507){
    spi_tft.clear((0x001F));
    spi_tft.set_text_color((0xFFFF),(0x001F));
    spi_tft.set_cursor(30,50);
    spi_tft.draw_hanzi_16("当前温度");
    delay(1000);
    wen = asr_dht_7.read_temperature(0);
    spi_tft.set_cursor(55,80);
    spi_tft.set_text_size(16);
    spi_tft.println((String(wen)));
    //{ID:508,keyword:"命令词",ASR:"菌耍接",ASRTO:"当前温度为摄氏"}
    play_audio(508);
    play_num((int64_t)(wen * 100), 1);
    //{ID:509,keyword:"命令词",ASR:"纯耍接",ASRTO:"度"}
    play_audio(509);
}
//{ID:510,keyword:"命令词",ASR:"当前湿度",ASRTO:""}
if(snid == 510){
    spi_tft.clear((0xF800));
    spi_tft.set_text_color((0xFFFF),(0xF800));
    spi_tft.set_cursor(30,50);
    spi_tft.draw_hanzi_16("当前湿度");
    delay(1000);
    shi = asr_dht_7.read_temperature(1);
    spi_tft.set_cursor(55,80);
    spi_tft.set_text_size(16);
    spi_tft.println((String(shi)));
    //{ID:511,keyword:"命令词",ASR:"趣耍接",ASRTO:"当前湿度为百分之"}
    play_audio(511);
    play_num((int64_t)(shi * 100), 1);
}
//{ID:512,keyword:"命令词",ASR:"同时读取",ASRTO:""}
if(snid == 512){
    spi_tft.clear((0xFFFF));
    spi_tft.set_text_color((0x001F),(0xFFFF));
    spi_tft.set_cursor(30,30);
    spi_tft.draw_hanzi_16("当前温度");
    delay(1000);
    wen = asr_dht_7.read_temperature(0);
    spi_tft.set_cursor(55,60);
    spi_tft.set_text_size(16);
    spi_tft.println((String(wen)));
    //{ID:513,keyword:"命令词",ASR:"暖耍接",ASRTO:"当前温度为摄氏"}
    play_audio(513);
    play_num((int64_t)(wen * 100), 1);
    //{ID:514,keyword:"命令词",ASR:"猛耍接",ASRTO:"度"}
    play_audio(514);
    delay(2000);
    spi_tft.set_text_color((0xF800),(0xFFFF));
    spi_tft.set_cursor(30,90);
    spi_tft.draw_hanzi_16("当前湿度");
    delay(1000);
    shi = asr_dht_7.read_temperature(1);
    spi_tft.set_cursor(55,120);
    spi_tft.set_text_size(16);
    spi_tft.println((String(shi)));
    //{ID:515,keyword:"命令词",ASR:"耍官接",ASRTO:"当前湿度为百分之"}
    play_audio(515);
    play_num((int64_t)(shi * 100), 1);
}
}

void hardware_init(){
spi_tft.init();
spi_tft.set_direction(2);
spi_tft.set_text_wrap(true);
spi_tft.set_text_size(32);
spi_tft.set_bg_mode(1);
xTaskCreate(pins_attached,"pins_attached",256,NULL,4,NULL);
vTaskDelete(NULL);
}

void setup()
{
//{speak:小伦-放松,vol:20,speed:10,platform:haohaodada,version:V3}
//{playid:10001,voice:欢迎使用人工智能AI语音助手,用智能管家唤醒我}
//{playid:10002,voice:我退下了,用智能管家唤醒我}
asr_dht_7.init();
digital_write((4),1);
digital_write((21),0);
digital_write((19),1);

//{ID:84,keyword:"命令词",ASR:"条耍改",ASRTO:"零"}
//{ID:85,keyword:"命令词",ASR:"官接思",ASRTO:"一"}
//{ID:86,keyword:"命令词",ASR:"痛官松",ASRTO:"二"}
//{ID:87,keyword:"命令词",ASR:"削丝误",ASRTO:"三"}
//{ID:88,keyword:"命令词",ASR:"景粮载",ASRTO:"四"}
//{ID:89,keyword:"命令词",ASR:"博菌避",ASRTO:"五"}
//{ID:90,keyword:"命令词",ASR:"裁纯碉",ASRTO:"六"}
//{ID:91,keyword:"命令词",ASR:"插趣悟",ASRTO:"七"}
//{ID:92,keyword:"命令词",ASR:"辞暖慌",ASRTO:"八"}
//{ID:93,keyword:"命令词",ASR:"纵猛淡",ASRTO:"九"}
//{ID:94,keyword:"命令词",ASR:"锦耗暂",ASRTO:"十"}
//{ID:95,keyword:"命令词",ASR:"燃智截",ASRTO:"百"}
//{ID:96,keyword:"命令词",ASR:"佛驻延",ASRTO:"千"}
//{ID:97,keyword:"命令词",ASR:"隔枪绍",ASRTO:"万"}
//{ID:98,keyword:"命令词",ASR:"惨愤昂",ASRTO:"亿"}
//{ID:99,keyword:"命令词",ASR:"丙迈扯",ASRTO:"负"}
//{ID:100,keyword:"命令词",ASR:"铸猜隆",ASRTO:"点"}
set_gpio_input((18));
set_gpio_input((4));
xTaskCreate(hardware_init,"hardware_init",256,NULL,100,NULL);
}
训练模型与编译烧录





实验记录视频

https://www.bilibili.com/video/BV1mG411z7nb/?share_source=copy_web&vd_source=371a292a55e5ca9be994cbb4a86cc987

https://www.bilibili.com/video/BV1mG411z7nb/?share_source=copy_web&vd_source=371a292a55e5ca9be994cbb4a86cc987








页: [1]
查看完整版本: 【花雕动手做】ASRPRO语音识别(20)---彩屏显示DHT11温湿度